For many years there seemed to be just one efficient solution to keep information on your computer – with a disk drive (HDD). Then again, this kind of technology is already expressing it’s age – hard disks are actually loud and sluggish; they’re power–ravenous and tend to generate quite a lot of heat for the duration of intense procedures.

SSD drives, on the contrary, are fast, take in a lesser amount of energy and tend to be far less hot. They provide a brand new method to file access and data storage and are years ahead of HDDs in relation to file read/write speed, I/O performance and energy capability. Find out how HDDs fare up against the modern SSD drives.

1. Access Time

Because of a radical new solution to disk drive operation, SSD drives make it possible for faster data file accessibility rates. With an SSD, data access times tend to be lower (only 0.1 millisecond).

The concept powering HDD drives dates all the way to 1954. And while it’s been considerably enhanced as time passes, it’s still can’t stand up to the imaginative concept powering SSD drives. With today’s HDD drives, the best data file access speed you’ll be able to attain can vary somewhere between 5 and 8 milliseconds.

2. Random I/O Performance

Resulting from the brand new significant data storage strategy shared by SSDs, they furnish faster data access rates and speedier random I/O performance.

In the course of Duoservers Global Web Hosting’s trials, all SSDs revealed their ability to deal with at the very least 6000 IO’s per second.

Hard drives provide slower data access rates due to the aging file storage space and accessibility technique they’re employing. And they also demonstrate substantially sluggish random I/O performance when compared to SSD drives.

Throughout our tests, HDD drives handled an average of 400 IO operations per second.

3. Reliability

SSD drives lack any kind of rotating components, which means that there is a lot less machinery in them. And the fewer literally moving elements you will discover, the lower the prospect of failing can be.

The regular rate of failing of any SSD drive is 0.5%.

With an HDD drive to operate, it must rotate a few metal disks at a minimum of 7200 rpm, holding them magnetically stable in the air. They have a wide range of moving parts, motors, magnets and also other devices jammed in a small space. Hence it’s no wonder that the standard rate of failing of the HDD drive ranges among 2% and 5%.

4. Energy Conservation

SSD drives are considerably smaller than HDD drives and they don’t have any kind of moving parts at all. It means that they don’t produce as much heat and need less energy to function and fewer energy for cooling down reasons.

SSDs consume somewhere between 2 and 5 watts.

HDD drives are notorious for getting loud; they are at risk of heating up and whenever you have several hard drives inside a server, you need a different cooling unit simply for them.

As a whole, HDDs consume somewhere between 6 and 15 watts.

5. CPU Power

SSD drives permit swifter data file accessibility speeds, which, in turn, enable the processor to accomplish data calls considerably quicker and to go back to other duties.

The standard I/O hold out for SSD drives is simply 1%.

If you use an HDD, you’ll have to devote extra time waiting around for the outcomes of one’s file request. Because of this the CPU will be idle for extra time, waiting for the HDD to reply.

The regular I/O wait for HDD drives is around 7%.

6.Input/Output Request Times

In real life, SSDs perform as admirably as they did throughout the lab tests. We ran a complete system back–up using one of our production servers. Through the backup procedure, the regular service time for I/O calls was under 20 ms.

In comparison to SSD drives, HDDs deliver considerably slower service rates for I/O calls. Throughout a web server backup, the standard service time for any I/O query varies somewhere between 400 and 500 ms.

7. Backup Rates

A different real–life advancement is the speed with which the back up was produced. With SSDs, a web server back up currently requires no more than 6 hours implementing Duoservers Global Web Hosting’s server–designed software solutions.

Over time, we have got made use of primarily HDD drives on our machines and we are knowledgeable of their general performance. On a hosting server built with HDD drives, a full hosting server data backup may take around 20 to 24 hours.

With Duoservers Global Web Hosting, you will get SSD–driven hosting solutions at cost–effective price points. Our Linux website hosting include SSD drives by default. Get an account with Duoservers Global Web Hosting and experience how your sites can become far better automatically.


  • Service guarantees

  •  
  • Our Virtual Private Servers provide no setup service fees and operate in a dependable network delivering 99.9% of uptime. Full root and SSH access warranted.
  • Compare our prices

  •  
  • Check out our prices and select the ideal Virtual Private Server for your powerful websites. It is easy to migrate to a more advanced VPS Hosting package with a mouse click.
  • Compare our hosting plans
  • Contact Us

  •  
  • Our representatives are online for you 24x7x365 to resolve any sort of queries in relation to our VPS Hosting platform. 1–hour reply time guarantee.